Description
The Elna Rolled Hem Foot is sometimes referred to as the rolled hemmer.
It is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills.
The Rolled Hem Foot is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem.
Which Rolled Hem Foot is Right for my Elna Machine?
First you need to check your machine’s stitch width category – group A, B, C or D.
Click here to check your Elna machine stitch width category – group A, B, C or D – (opens in a new tab or window) – and then return to this page.
Depending on your machine category, the Rolled Hem Foot comes in 3 hem widths: 2mm, 4mm and 6mm hem width.
Group A – Elna machines with 5mm Maximum Stitch Width
For machines in this group, the Rolled Hem Foot is only available in 2mm hem width.
Group B – Elna machines with 7mm Maximum Stitch Width – Low Shank
For machines in this group, the Rolled Hem Foot is available in 2mm hem width (part no. 820 809 014).
It is also available in a combined pack of two feet, the 4mm and the 6mm hem width feet (part no. 200 326 001).
Group C – Elna machines with 7mm Maximum Stitch Width – High Shank
For machines in this group, the Rolled Hem Foot is available in 2mm hem width (part no. 820 809 014).
It is also available in a combined pack of two feet, the 4mm and the 6mm hem width feet (part no. 200 326 001).
Group D – Elna machines with 9mm Maximum Stitch Width
For machines in this group, the Rolled Hem Foot is available in either 2mm hem width (part no. 859 804 008), 4mm hem width (part no. 202 081 007), or 6mm hem width (part no. 202 080 006).
If you are not sure about your machine’s stitch width category, give us a ring or text on 0452 283 499.
Pick up at Nedlands store or buy online.
