Janome Rolled Hem Foot


SKU: N/A Category:


The Janome Rolled Hem Foot is sometimes referred to as the rolled hemmer, and  is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills.

The Rolled Hem Foot is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem.

Depending on your machine category, the Rolled Hem Foot comes in 3 hem widths: 2mm, 4mm and 6mm.

Click here to check your machine stitch width category – group A, B, C or D – (opens in a new tab or window) – and then return to this page.

Group A – Machines with 5mm Maximum Stitch Width

For machines in this group, the Rolled Hem Foot is only available in 2mm hem width.

Group B – Machines with 7mm Maximum Stitch Width – Low Shank

For machines in this group, the Rolled Hem Foot is available in 2mm hem width (part no. 820 809 014) or in a combined pack of two feet, the 4mm and the 6mm hem width feet (part no. 200 326 001).

Group C – Machines with 7mm Maximum Stitch Width – High Shank

Group D – Machines with 9mm Maximum Stitch Width

If you are not sure about your machine’s stitch width category, give us a ring or text on 0452 283 499.

Note: Our Janome feet are genuine Janome accessories. Beware of bogus generic products that claim that because it fits a Janome, it is a Janome part. Only genuine Janome accessories come through the rigorous supply chain of Janome Sewing Machine Co., Ltd founded in Japan in 1921.

Pick up at Nedlands store or buy online.


Additional information

Your machine category (see below)

A – 2mm hem, B – 2mm hem, B – 4 and 6mm hem, C – 2mm hem, C – 4 and 6mm hem, D – 2mm hem, D – 4mm hem, D – 6mm hem